Відео

Glad it was helpful!

1 step looper pliers 😁

This was made with polymer clay, sculpy 3, I don't use it now because it's not meant for jewelry, I was still learning here. I would think you could use polymer clay, I use sculpy premo now, just bake a sheet of it, cut it up(good clay bends), and then add it to the quick crete. I don't see what it'd hurt. However, I haven't tried this. But if I was going to, that's how I'd do it.

@@MixinMadness thank you so much! I’ll grab some of that!!

Anytime!

I don't care to chill it because of time constraints. But it will help with slicing. Even just leaving it to sit a while. Glad you liked it!

I'd imagine so. You would need to research the thicknesses it would need and such or just do it with trial and error. It really depends on what it will be used for.

They came with the roller. It's from the baking section at Walmart. 😉

This is true. But most were cracked all the way through, so there was no saving them unfortunately. 🙁

Oh, just read the answers in the comment below, great video! 👍

It's a drill bit for an impact but any drill bit will do as long as you're ok with the size.

Yeah I think that would work, make a snake on sphere and apply your pieces. They'll distort some when you shape it into whatever but I don't think it would be much.

Thank you, I'll have to check on that. Glad you enjoyed it and I'd love to see what you create!

I'm not sure? It's there. Maybe try again and make sure you have a good connection?

At the recommend temp on the package for an hour I believe. I typically bake everything for an hour.

The silver was bought like that. I mix pearl or white with it to lighten it sometimes but that's about all I've done to change it so far. 😊

@@MixinMadness Thank you very much for the answer and for the video :)

The clay is not baked before cutting

It's an Amaco pasta machine but any will work.

Thank you so much 👍

Thanks

Thanks for stopping by! Glad you liked it!

Just depends on what I'm making. Typically my pieces are 1-2 mm thick, sometimes more or less.

You're welcome!

Curious what my music and thumbnails have to do with me hitting a thousand subscribers 🤔

Mixin Madness your thumbnail get you more subscribers and having nice music keep them stay..i thought channels with 1k subscribers get seen more 🤔maybe I'm wrong . ...was i rude? I'm really sorry...

@@ayaeliwa8253 I was just curious what you meant by it. You're fine. I know most don't like much of the music, but I told myself I was going to stay true to who I am. I would not be happy with my videos if I had elevator music in them, it's just not to my liking.

Great tutorial!i have to agree about the music, either something a little calmer or maybe the same music but a little bit more quiet? Every time the music came on I turned it down 🙈 and I love house music 😂

Welcome! Glad to have you here and thank you!

Hi Fiona! I dip everything in corn starch before using it so it doesn't stick to the clay. I have since stopped using it because I have better tools and clay now. But if there ever comes a time where I might need it, I have it handy. At the end when I'm sanding, I'm just dipping them in water to try and keep the dust down. It also helps the paper glide across the pieces. Some people use water with a drop of soap in it, but I haven't needed to do that so far. Thanks for watching!

Thank you! I bought the molds from Amazon. It was a 3 pack set.

J'y ajoute de l'eau pour l'éclaircir afin qu'elle coule mieux. Il aide également à créer des cellules. :)

I'm sorry I'm just now seeing your comment. UA-cam never notified me.🙄 But to your answer question, yes ma'am, I bake them in the molds. If you tried to take it out while it's still raw it would just mess it all up. Just wish there was an easier way to get the tops to look like the bottoms, lol. Hope this helped and thanks for stopping by!

Thank you! I did also, just wish I would have made them from good clay, lol. But I learned that lesson the hard way.

I have purchased one since this video and LOVE it! I got it from Amazon with the two day shipping because I couldn't wait months for it, lol. I tried the bag with the tip in it but it was SOOOO hard to push it through. I never want to have to do that again. 🤣 Thank you for the info and for stopping by!

Danke fürs zuschauen

Thank you!

It was a new can of minwax polyurethane from a local store, glossy, oil based I do believe and I'm pretty sure that's what caused it to turn yellow. The color of the liquid had a slight yellow look to it in the can, the correct one you are supposed to use should be white in the can. I now use polycrylic and it works perfect. Thanks for watching and let me know if you have any other questions I might can help with! :)

Where did you get the molds?

Thank you Carly, I'm glad you found it helpful. I got these from amazon.

You can put silicone molds in oven

Thank you

Hey there! I think what you're asking about is the velcro sander that I used toward the end correct? Sand paper sticks to it to make sanding easier. 😊

Thank you for watching! 😁 The bands on the roller are thickness guides. I got this roller in the baking section from Walmart.

You can use water. Just be careful not to add too much.

Appreciate that! The alcohol evaporates and I seal mine after they dry with a spray sealant. Haven't had any problems. I don't think it would matter if it were metal. Maybe try a 3x3 in piece to try first?

Hey cool! Thanks for the reply. But what I am doing is not art-related at all. I am building something that will be sprayed with alcohol on a regular basis and I need to seal the cracks between metal sheets. Still a cool picture though.

Ohhhhhh. Welp, sorry I couldn't help ya out more. Good luck though!

Actually I think you are responsible for a brilliant idea. I was going to line the inside of this chamber with stainless steel... but do you think epoxy resin will be OK if it is wiped down with isopropyl alcohol frequently? Because I think the interior would look 1000% nicer =)

@@Krath1988 I wish I could say yes, but I have no experience with resin. 😔

I saw her when I went to research if anyone has done it before now. She's good.

Thank you for watching!

It was just painted white. It was going to be for another project but it was all I had left so I used it.